SBVF360 Series - Forged High Pressure Ball Valves

Features   Compact design   Low operating torques   Panel mountable   Floating ball design   Two-way and Three way types   Handle direction indicates flow direction Specification Temperature Ratings 316 Stainless Steel : -65° F to 1200° F ( -53° C to 648° C) PCTFE : -65° F to 200° F ( -53° C to 93° C) PTFE : -65° F to 350° F ( -53° C to 177° C) PEEK : -65° F to 450° F ( -53° C to 232° C) NBR : -40° F to 250° F ( -40° C to 120° C) VITON : -15° F to 450° F ( -26° C to 232° C) Orifice Size From 0.086" to 0.406" ( 2.2mm to 10.3mm) Flow Coefficients ( Cv) From 0.18 to 6.42 End Connection Size From 1/ 8" to 3/ 4" , 3mm to 16mm Pressure Ratings at 100° F( 37° C) 316 Stainless Steel : 6000 psig ( 413 bar) BRASS : 3000 psig ( 207 bar) Testing   Each and every Valve is tested with nitrogen at 1000psig ( 69bar) .   Valve have max allowable leak rate of 0.1 cm3/ min.   Shell testing is performed on demand. Materials of Construction * 1 Body ASTM A182-316 ASTM B283 * 2 End Connector ASTM A276-316 ASTM B16 * 3 Ball ASTM A276-316 * 4 Stem ASTM A276-316 * 5 Seal Retainer ASTM A276-316 * 6 Seat Standard PCTFE ( PTFE, PEEK) * 7 Lower Packing PTFE * 8 Upper Packing PTFE 9 Packing Bolt ASTM A276-316 * 10 O - Ring VITON * 11 Connector Seal PTFE * 12 Thrust Washer PEEK 13 Stem Washer ASTM A276-316 14 Panel Nut ASTM A276-316 15 Handle Aluminum * Wetted components are marked " * " Swagelok & Parker Interchangeability